钢衬塑管道要避免阳光的暴晒，远离火源热源，也要注意防潮。

产品的两头端面处有铁，塑料或木质盲板，或木箱、软纸包装。

钢衬塑管道在安装前方可拆除盲板，出箱，包装拆除或出箱后应及时安装，不可长时间放置或移动，在低温高寒地区注意产品保温。

钢衬塑是钢塑复合储罐系列产品的精华。将钢网焊接于钢体表面，以聚乙烯为原料，采用旋塑工艺一次整体成型于钢体表面，由于钢网与聚乙烯为一体且钢网焊于钢体表面，使聚乙烯难以脱离钢体表面。

钢在装卸过程中要注意保护钢衬塑管道外的防腐漆和其它镀附包装，防止钢管表面腐蚀。

不能用叉车装卸，因为管道两端口做了密封，防止衬里层刮蹭延长管道使用期限。

到货后的管道保证安全的前提下，地面有木垫堆码，要求码垛稳固，注意安放平直，管道按规格型号做好标记，在入库前要做好防止雨淋和弄污，有污渍的表面可以用棉麻布等物擦干净。

Steel lined plastic pipes should be protected from the sun, away from fire and heat sources, and pay attention to moisture protection.

There are iron, plastic or wooden blind plates, or wooden cases and soft paper packaging at the two end faces of the product.

The blind plate of steel lined plastic pipe can be removed before installation, and it shall be installed in time after removal of packaging or out of the box. It shall not be placed or moved for a long time. Pay attention to product insulation in low temperature and high cold areas.

Steel plastic lining is the essence of steel plastic composite storage tank series products. The steel mesh is welded on the surface of the steel body, and polyethylene is used as raw material, which is integrally formed on the surface of the steel body at one time by rotary molding process. Because the steel mesh is integrated with polyethylene and the steel mesh is welded on the surface of the steel body, it is difficult for polyethylene to separate from the surface of the steel body.

During the loading and unloading of steel, attention shall be paid to protecting the anti-corrosion paint and other plated packaging outside the steel lined plastic pipe to prevent the surface corrosion of the steel pipe.

The forklift cannot be used for loading and unloading, because the two ends of the pipeline are sealed to prevent the lining layer from scraping and prolong the service life of the pipeline.

On the premise of ensuring the safety of the pipes after arrival, wooden mats shall be stacked on the ground. The stacking shall be stable, and the pipes shall be placed straight and straight. The pipes shall be marked according to the specifications and models. Before warehousing, they shall be protected from rain and contamination. The stained surface can be cleaned with cotton linen and other objects.